aerc: add config

config/dot_config/aerc/aerc.conf

@@ -0,0 +1,605 @@
+#
+# aerc main configuration
+
+[general]
+#
+# Used as a default path for save operations if no other path is specified.
+# ~ is expanded to the current user home dir.
+#
+#default-save-path=
+
+# If set to "gpg", aerc will use system gpg binary and keystore for all crypto
+# operations. If set to "internal", the internal openpgp keyring will be used.
+# If set to "auto", the system gpg will be preferred unless the internal
+# keyring already exists, in which case the latter will be used.
+#
+# Default: auto
+#pgp-provider=auto
+
+# By default, the file permissions of accounts.conf must be restrictive and
+# only allow reading by the file owner (0600). Set this option to true to
+# ignore this permission check. Use this with care as it may expose your
+# credentials.
+#
+# Default: false
+#unsafe-accounts-conf=false
+
+# Output log messages to specified file. A path starting with ~/ is expanded to
+# the user home dir. When redirecting aerc's output to a file using > shell
+# redirection, this setting is ignored and log messages are printed to stdout.
+#
+#log-file=
+
+# Only log messages above the specified level to log-file. Supported levels
+# are: trace, debug, info, warn and error. When redirecting aerc's output to
+# a file using > shell redirection, this setting is ignored and the log level
+# is forced to trace.
+#
+# Default: info
+#log-level=info
+
+# Set the $TERM environment variable used for the embedded terminal.
+#
+# Default: xterm-256color
+#term=xterm-256color
+
+# Display OSC8 strings in the embedded terminal
+#
+# Default: false
+#enable-osc8=false
+
+[ui]
+#
+# Describes the format for each row in a mailbox view. This is a comma
+# separated list of column names with an optional align and width suffix. After
+# the column name, one of the '<' (left), ':' (center) or '>' (right) alignment
+# characters can be added (by default, left) followed by an optional width
+# specifier. The width is either an integer representing a fixed number of
+# characters, or a percentage between 1% and 99% representing a fraction of the
+# terminal width. It can also be one of the '*' (auto) or '=' (fit) special
+# width specifiers. Auto width columns will be equally attributed the remaining
+# terminal width. Fit width columns take the width of their contents. If no
+# width specifier is set, '*' is used by default.
+#
+# Default: date<20,name<17,flags>4,subject<*
+#index-columns=date<20,name<17,flags>4,subject<*
+
+#
+# Each name in index-columns must have a corresponding column-$name setting.
+# All column-$name settings accept golang text/template syntax. See
+# aerc-templates(7) for available template attributes and functions.
+#
+# Default settings
+#column-date={{.DateAutoFormat .Date.Local}}
+#column-name={{index (.From | names) 0}}
+#column-flags={{.Flags | join ""}}
+#column-subject={{.ThreadPrefix}}{{if .ThreadFolded}}{{printf "{%d}" .ThreadCount}}{{end}}{{.Subject}}
+
+#
+# String separator inserted between columns. When the column width specifier is
+# an exact number of characters, the separator is added to it (i.e. the exact
+# width will be fully available for the column contents).
+#
+# Default: "  "
+#column-separator="  "
+
+#
+# See time.Time#Format at https://godoc.org/time#Time.Format
+#
+# Default: 2006-01-02 03:04 PM (ISO 8601 + 12 hour time)
+#timestamp-format=2006-01-02 03:04 PM
+
+#
+# Index-only time format for messages that were received/sent today.
+# If this is not specified, timestamp-format is used instead.
+#
+#this-day-time-format=
+
+#
+# Index-only time format for messages that were received/sent within the last
+# 7 days. If this is not specified, timestamp-format is used instead.
+#
+#this-week-time-format=
+
+#
+# Index-only time format for messages that were received/sent this year.
+# If this is not specified, timestamp-format is used instead.
+#
+#this-year-time-format=
+
+#
+# Width of the sidebar, including the border.
+#
+# Default: 20
+#sidebar-width=20
+
+#
+# Message to display when viewing an empty folder.
+#
+# Default: (no messages)
+#empty-message=(no messages)
+
+# Message to display when no folders exists or are all filtered
+#
+# Default: (no folders)
+#empty-dirlist=(no folders)
+
+# Enable mouse events in the ui, e.g. clicking and scrolling with the mousewheel
+#
+# Default: false
+#mouse-enabled=false
+
+#
+# Ring the bell when new messages are received
+#
+# Default: true
+#new-message-bell=true
+
+#
+# Template to use for Account tab titles
+#
+# Default: {{.Account}}
+#tab-title-account={{.Account}}
+
+# Marker to show before a pinned tab's name.
+#
+# Default: `
+#pinned-tab-marker='`'
+
+# Template for the left side of the directory list.
+# See aerc-templates(7) for all available fields and functions.
+#
+# Default: {{.Folder}}
+#dirlist-left={{.Folder}}
+
+# Template for the right side of the directory list.
+# See aerc-templates(7) for all available fields and functions.
+#
+# Default: {{if .Unread}}{{humanReadable .Unread}}/{{end}}{{if .Exists}}{{humanReadable .Exists}}{{end}}
+#dirlist-right={{if .Unread}}{{humanReadable .Unread}}/{{end}}{{if .Exists}}{{humanReadable .Exists}}{{end}}
+
+# Delay after which the messages are actually listed when entering a directory.
+# This avoids loading messages when skipping over folders and makes the UI more
+# responsive. If you do not want that, set it to 0s.
+#
+# Default: 200ms
+#dirlist-delay=200ms
+
+# Display the directory list as a foldable tree that allows to collapse and
+# expand the folders.
+#
+# Default: false
+#dirlist-tree=false
+
+# If dirlist-tree is enabled, set level at which folders are collapsed by
+# default. Set to 0 to disable.
+#
+# Default: 0
+#dirlist-collapse=0
+
+# List of space-separated criteria to sort the messages by, see *sort*
+# command in *aerc*(1) for reference. Prefixing a criterion with "-r "
+# reverses that criterion.
+#
+# Example: "from -r date"
+#
+#sort=
+
+# Moves to next message when the current message is deleted
+#
+# Default: true
+#next-message-on-delete=true
+
+# Automatically set the "seen" flag when a message is opened in the message
+# viewer.
+#
+# Default: true
+#auto-mark-read=true
+
+# The directories where the stylesets are stored. It takes a colon-separated
+# list of directories. If this is unset or if a styleset cannot be found, the
+# following paths will be used as a fallback in that order:
+#
+#   ${XDG_CONFIG_HOME:-~/.config}/aerc/stylesets
+#   ${XDG_DATA_HOME:-~/.local/share}/aerc/stylesets
+#   /usr/local/share/aerc/stylesets
+#   /usr/share/aerc/stylesets
+#
+#stylesets-dirs=
+
+# Uncomment to use box-drawing characters for vertical and horizontal borders.
+#
+# Default: " "
+#border-char-vertical=" "
+#border-char-horizontal=" "
+border-char-vertical="│"
+border-char-horizontal="─"
+
+# Sets the styleset to use for the aerc ui elements.
+#
+# Default: default
+#styleset-name=default
+styleset-name=catppuccin-frappe
+
+# Activates fuzzy search in commands and their arguments: the typed string is
+# searched in the command or option in any position, and need not be
+# consecutive characters in the command or option.
+#
+# Default: false
+#fuzzy-complete=false
+
+# How long to wait after the last input before auto-completion is triggered.
+#
+# Default: 250ms
+#completion-delay=250ms
+
+# The minimum required characters to allow auto-completion to be triggered after
+# completion-delay.
+#
+# Default: 1
+#completion-min-chars=1
+
+#
+# Global switch for completion popovers
+#
+# Default: true
+#completion-popovers=true
+
+# Uncomment to use UTF-8 symbols to indicate PGP status of messages
+#
+# Default: ASCII
+#icon-unencrypted=
+#icon-encrypted=✔
+#icon-signed=✔
+#icon-signed-encrypted=✔
+#icon-unknown=✘
+#icon-invalid=⚠
+
+# Reverses the order of the message list. By default, the message list is
+# ordered with the newest (highest UID) message on top. Reversing the order
+# will put the oldest (lowest UID) message on top. This can be useful in cases
+# where the backend does not support sorting.
+#
+# Default: false
+#reverse-msglist-order = false
+
+# Reverse display of the mesage threads. Default order is the the intial
+# message is on the top with all the replies being displayed below. The
+# reverse option will put the initial message at the bottom with the
+# replies on top.
+#
+# Default: false
+#reverse-thread-order=false
+
+# Sort the thread siblings according to the sort criteria for the messages. If
+# sort-thread-siblings is false, the thread siblings will be sorted based on
+# the message UID in ascending order. This option is only applicable for
+# client-side threading with a backend that enables sorting. Note that there's
+# a performance impact when sorting is activated.
+#
+# Default: false
+#sort-thread-siblings=false
+
+#[ui:account=foo]
+#
+# Enable a threaded view of messages. If this is not supported by the backend
+# (IMAP server or notmuch), threads will be built by the client.
+#
+# Default: false
+#threading-enabled=false
+
+# Force client-side thread building
+#
+# Default: false
+#force-client-threads=false
+
+# Show thread context enables messages which do not match the current query (or
+# belong to the current mailbox) to be shown for context. These messages can be
+# styled separately using "msglist_thread_context" in a styleset. This feature
+# is not supported by all backends
+#
+# Default: false
+#show-thread-context=false
+
+# Debounce client-side thread building
+#
+# Default: 50ms
+#client-threads-delay=50ms
+
+[statusline]
+#
+# Describes the format for the status line. This is a comma separated list of
+# column names with an optional align and width suffix. See [ui].index-columns
+# for more details. To completely mute the status line except for push
+# notifications, explicitly set status-columns to an empty string.
+#
+# Default: left<*,center:=,right>*
+#status-columns=left<*,center:=,right>*
+
+#
+# Each name in status-columns must have a corresponding column-$name setting.
+# All column-$name settings accept golang text/template syntax. See
+# aerc-templates(7) for available template attributes and functions.
+#
+# Default settings
+#column-left=[{{.Account}}] {{.StatusInfo}}
+#column-center={{.PendingKeys}}
+#column-right={{.TrayInfo}}
+
+#
+# String separator inserted between columns.
+# See [ui].column-separator for more details.
+#
+#column-separator=" "
+
+# Specifies the separator between grouped statusline elements.
+#
+# Default: " | "
+#separator=" | "
+
+# Defines the mode for displaying the status elements.
+# Options: text, icon
+#
+# Default: text
+#display-mode=text
+
+[viewer]
+#
+# Specifies the pager to use when displaying emails. Note that some filters
+# may add ANSI codes to add color to rendered emails, so you may want to use a
+# pager which supports ANSI codes.
+#
+# Default: less -Rc
+#pager=less -Rc
+
+#
+# If an email offers several versions (multipart), you can configure which
+# mimetype to prefer. For example, this can be used to prefer plaintext over
+# html emails.
+#
+# Default: text/plain,text/html
+#alternatives=text/plain,text/html
+
+#
+# Default setting to determine whether to show full headers or only parsed
+# ones in message viewer.
+#
+# Default: false
+#show-headers=false
+
+#
+# Layout of headers when viewing a message. To display multiple headers in the
+# same row, separate them with a pipe, e.g. "From|To". Rows will be hidden if
+# none of their specified headers are present in the message.
+#
+# Default: From|To,Cc|Bcc,Date,Subject
+#header-layout=From|To,Cc|Bcc,Date,Subject
+
+# Whether to always show the mimetype of an email, even when it is just a single part
+#
+# Default: false
+#always-show-mime=false
+
+# Parses and extracts http links when viewing a message. Links can then be
+# accessed with the open-link command.
+#
+# Default: true
+#parse-http-links=true
+
+[compose]
+#
+# Specifies the command to run the editor with. It will be shown in an embedded
+# terminal, though it may also launch a graphical window if the environment
+# supports it. Defaults to $EDITOR, or vi.
+editor=helix
+
+#
+# When set, aerc will create and read .eml files for composing that have
+# non-standard \n linebreaks. This is only relevant if the used editor does not
+# support CRLF linebreaks.
+#
+#lf-editor=false
+
+#
+# Default header fields to display when composing a message. To display
+# multiple headers in the same row, separate them with a pipe, e.g. "To|From".
+#
+# Default: To|From,Subject
+#header-layout=To|From,Subject
+
+#
+# Edit headers into the text editor instead than separate fields.
+#
+# When this is true, address-book-cmd is not supported and address completion
+# is left to the editor itself. Also, displaying multiple headers on the same
+# line is not possible.
+#
+# Default: false
+#edit-headers=false
+
+#
+# Specifies the command to be used to tab-complete email addresses. Any
+# occurrence of "%s" in the address-book-cmd will be replaced with what the
+# user has typed so far.
+#
+# The command must output the completions to standard output, one completion
+# per line. Each line must be tab-delimited, with an email address occurring as
+# the first field. Only the email address field is required. The second field,
+# if present, will be treated as the contact name. Additional fields are
+# ignored.
+#
+# This parameter can also be set per account in accounts.conf.
+#address-book-cmd=
+
+# Specifies the command to be used to select attachments. Any occurrence of
+# '%s' in the file-picker-cmd will be replaced with the argument <arg>
+# to :attach -m <arg>. Any occurence of '%f' will be replaced by the
+# location of a temporary file, from which aerc will read the selected files.
+#
+# If '%f' is not present, the command must output the selected files to
+# standard output, one file per line. If it is present, then aerc does not
+# capture the standard output and instead reads the files from the temporary
+# file which should have the same format.
+#file-picker-cmd=
+
+#
+# Allow to address yourself when replying
+#
+# Default: true
+#reply-to-self=true
+
+# Warn before sending an email with an empty subject.
+#
+# Default: false
+#empty-subject-warning=false
+
+#
+# Warn before sending an email that matches the specified regexp but does not
+# have any attachments. Leave empty to disable this feature.
+#
+# Uses Go's regexp syntax, documented at https://golang.org/s/re2syntax. The
+# "(?im)" flags are set by default (case-insensitive and multi-line).
+#
+# Example:
+# no-attachment-warning=^[^>]*attach(ed|ment)
+#
+#no-attachment-warning=
+
+#
+# When set, aerc will generate "format=flowed" bodies with a content type of
+# "text/plain; format=flowed" as described in RFC3676. This format is easier to
+# handle for some mailing software, and generally just looks like ordinary
+# text. To actually make use of this format's features, you'll need support in
+# your editor.
+#
+#format-flowed=false
+
+[multipart-converters]
+#
+# Converters allow to generate multipart/alternative messages by converting the
+# main text/plain part into any other MIME type. Only exact MIME types are
+# accepted. The commands are invoked with sh -c and are expected to output
+# valid UTF-8 text.
+#
+# Example (obviously, this requires that you write your main text/plain body
+# using the markdown syntax):
+#text/html=pandoc -f markdown -t html --standalone
+
+[filters]
+#
+# Filters allow you to pipe an email body through a shell command to render
+# certain emails differently, e.g. highlighting them with ANSI escape codes.
+#
+# The commands are invoked with sh -c. The following folders are prepended to
+# the system $PATH to allow referencing filters from their name only:
+#
+#   ${XDG_CONFIG_HOME:-~/.config}/aerc/filters
+#   ~/.local/libexec/aerc/filters
+#   ${XDG_DATA_HOME:-~/.local/share}/aerc/filters
+#   $PREFIX/libexec/aerc/filters
+#   $PREFIX/share/aerc/filters
+#   /usr/libexec/aerc/filters
+#   /usr/share/aerc/filters
+#
+# If you want to run a program in your default $PATH which has the same name
+# as a builtin filter (e.g. /usr/bin/colorize), use its absolute path.
+#
+# The following variables are defined in the filter command environment:
+#
+#   AERC_MIME_TYPE      the part MIME type/subtype
+#   AERC_FORMAT         the part content type format= parameter
+#   AERC_FILENAME       the attachment filename (if any)
+#   AERC_SUBJECT        the message Subject header value
+#   AERC_FROM           the message From header value
+#
+# The first filter which matches the email's mimetype will be used, so order
+# them from most to least specific.
+#
+# You can also match on non-mimetypes, by prefixing with the header to match
+# against (non-case-sensitive) and a comma, e.g. subject,text will match a
+# subject which contains "text". Use header,~regex to match against a regex.
+#
+text/plain=colorize
+text/calendar=calendar
+message/delivery-status=colorize
+message/rfc822=colorize
+#text/html=pandoc -f html -t plain | colorize
+#text/html=html | colorize
+#text/*=bat -fP --file-name="$AERC_FILENAME"
+#application/x-sh=bat -fP -l sh
+#image/*=catimg -w $(tput cols) -
+#subject,~Git(hub|lab)=lolcat -f
+#from,thatguywhodoesnothardwraphismessages=wrap -w 100 | colorize
+
+# This special filter is only used to post-process email headers when
+# [viewer].show-headers=true
+# By default, headers are piped directly into the pager.
+#
+.headers=colorize
+
+[openers]
+#
+# Openers allow you to specify the command to use for the :open and :open-link
+# actions on a per-MIME-type basis. The :open-link URL scheme is used to
+# determine the MIME type as follows: x-scheme-handler/<scheme>.
+#
+# {} is expanded as the temporary filename to be opened. If it is not
+# encountered in the command, the temporary filename will be appened to the end
+# of the command.
+#
+# Like [filters], openers support basic shell globbing. The first opener which
+# matches the part's MIME type (or URL scheme handler MIME type) will be used,
+# so order them from most to least specific.
+#
+# Examples:
+# x-scheme-handler/irc=hexchat
+# x-scheme-handler/http*=firefox
+# text/html=surf -dfgms
+# text/plain=gvim {} +125
+# message/rfc822=thunderbird
+
+[hooks]
+#
+# Hooks are triggered whenever the associated event occurs.
+
+#
+# Executed when a new email arrives in the selected folder
+#mail-received=notify-send "[$AERC_ACCOUNT/$AERC_FOLDER] New mail from $AERC_FROM_NAME" "$AERC_SUBJECT"
+
+#
+# Executed when aerc starts
+#aerc-startup=aerc :terminal calcurse && aerc :next-tab
+
+#
+# Executed when aerc shuts down.
+#aerc-shutdown=
+
+[templates]
+# Templates are used to populate email bodies automatically.
+#
+
+# The directories where the templates are stored. It takes a colon-separated
+# list of directories. If this is unset or if a template cannot be found, the
+# following paths will be used as a fallback in that order:
+#
+#   ${XDG_CONFIG_HOME:-~/.config}/aerc/templates
+#   ${XDG_DATA_HOME:-~/.local/share}/aerc/templates
+#   /usr/local/share/aerc/templates
+#   /usr/share/aerc/templates
+#
+#template-dirs=
+
+# The default template to be used for new messages.
+#
+# default: new_message
+#new-message=new_message
+
+# The default template to be used for quoted replies.
+#
+# default: quoted_reply
+#quoted-reply=quoted_reply
+
+# The default template to be used for forward as body.
+#
+# default: forward_as_body
+#forwards=forward_as_body

config/dot_config/aerc/stylesets/catppuccin-frappe

@@ -0,0 +1,47 @@
+*.default=true
+*.normal=true
+
+default.fg=#c6d0f5
+
+error.fg=#e78284
+warning.fg=#ef9f76
+success.fg=#a6d189
+
+tab.fg=#737994
+tab.bg=#292c3c
+tab.selected.fg=#c6d0f5
+tab.selected.bg=#303446
+tab.selected.bold=true
+
+border.fg=#232634
+border.bold=true
+
+msglist_unread.bold=true
+msglist_flagged.fg=#e5c890
+msglist_flagged.bold=true
+msglist_result.fg=#8caaee
+msglist_result.bold=true
+msglist_*.selected.bold=true
+msglist_*.selected.bg=#414559
+
+dirlist_*.selected.bold=true
+dirlist_*.selected.bg=#414559
+
+statusline_default.fg=#949cbb
+statusline_default.bg=#414559
+statusline_error.bold=true
+statusline_success.bold=true
+
+[viewer]
+url.fg=#8caaee
+url.underline=true
+header.bold=true
+signature.dim=true
+diff_meta.bold=true
+diff_chunk.fg=#8caaee
+diff_chunk_func.fg=#8caaee
+diff_chunk_func.bold=true
+diff_add.fg=#a6d189
+diff_del.fg=#e78284
+quote_*.fg=#737994
+quote_1.fg=#949cbb

config/dot_config/aerc/stylesets/catppuccin-latte

@@ -0,0 +1,47 @@
+*.default=true
+*.normal=true
+
+default.fg=#4c4f69
+
+error.fg=#d20f39
+warning.fg=#fe640b
+success.fg=#40a02b
+
+tab.fg=#9ca0b0
+tab.bg=#e6e9ef
+tab.selected.fg=#4c4f69
+tab.selected.bg=#eff1f5
+tab.selected.bold=true
+
+border.fg=#dce0e8
+border.bold=true
+
+msglist_unread.bold=true
+msglist_flagged.fg=#df8e1d
+msglist_flagged.bold=true
+msglist_result.fg=#1e66f5
+msglist_result.bold=true
+msglist_*.selected.bold=true
+msglist_*.selected.bg=#ccd0da
+
+dirlist_*.selected.bold=true
+dirlist_*.selected.bg=#ccd0da
+
+statusline_default.fg=#7c7f93
+statusline_default.bg=#ccd0da
+statusline_error.bold=true
+statusline_success.bold=true
+
+[viewer]
+url.fg=#1e66f5
+url.underline=true
+header.bold=true
+signature.dim=true
+diff_meta.bold=true
+diff_chunk.fg=#1e66f5
+diff_chunk_func.fg=#1e66f5
+diff_chunk_func.bold=true
+diff_add.fg=#40a02b
+diff_del.fg=#d20f39
+quote_*.fg=#9ca0b0
+quote_1.fg=#7c7f93

config/dot_config/aerc/stylesets/catppuccin-macchiato

@@ -0,0 +1,47 @@
+*.default=true
+*.normal=true
+
+default.fg=#cad3f5
+
+error.fg=#ed8796
+warning.fg=#f5a97f
+success.fg=#a6da95
+
+tab.fg=#6e738d
+tab.bg=#1e2030
+tab.selected.fg=#cad3f5
+tab.selected.bg=#24273a
+tab.selected.bold=true
+
+border.fg=#181926
+border.bold=true
+
+msglist_unread.bold=true
+msglist_flagged.fg=#eed49f
+msglist_flagged.bold=true
+msglist_result.fg=#8aadf4
+msglist_result.bold=true
+msglist_*.selected.bold=true
+msglist_*.selected.bg=#363a4f
+
+dirlist_*.selected.bold=true
+dirlist_*.selected.bg=#363a4f
+
+statusline_default.fg=#939ab7
+statusline_default.bg=#363a4f
+statusline_error.bold=true
+statusline_success.bold=true
+
+[viewer]
+url.fg=#8aadf4
+url.underline=true
+header.bold=true
+signature.dim=true
+diff_meta.bold=true
+diff_chunk.fg=#8aadf4
+diff_chunk_func.fg=#8aadf4
+diff_chunk_func.bold=true
+diff_add.fg=#a6da95
+diff_del.fg=#ed8796
+quote_*.fg=#6e738d
+quote_1.fg=#939ab7