diff --git a/config/dot_config/aerc/aerc.conf b/config/dot_config/aerc/aerc.conf new file mode 100644 index 0000000..af7e95b --- /dev/null +++ b/config/dot_config/aerc/aerc.conf @@ -0,0 +1,605 @@ +# +# aerc main configuration + +[general] +# +# Used as a default path for save operations if no other path is specified. +# ~ is expanded to the current user home dir. +# +#default-save-path= + +# If set to "gpg", aerc will use system gpg binary and keystore for all crypto +# operations. If set to "internal", the internal openpgp keyring will be used. +# If set to "auto", the system gpg will be preferred unless the internal +# keyring already exists, in which case the latter will be used. +# +# Default: auto +#pgp-provider=auto + +# By default, the file permissions of accounts.conf must be restrictive and +# only allow reading by the file owner (0600). Set this option to true to +# ignore this permission check. Use this with care as it may expose your +# credentials. +# +# Default: false +#unsafe-accounts-conf=false + +# Output log messages to specified file. A path starting with ~/ is expanded to +# the user home dir. When redirecting aerc's output to a file using > shell +# redirection, this setting is ignored and log messages are printed to stdout. +# +#log-file= + +# Only log messages above the specified level to log-file. Supported levels +# are: trace, debug, info, warn and error. When redirecting aerc's output to +# a file using > shell redirection, this setting is ignored and the log level +# is forced to trace. +# +# Default: info +#log-level=info + +# Set the $TERM environment variable used for the embedded terminal. +# +# Default: xterm-256color +#term=xterm-256color + +# Display OSC8 strings in the embedded terminal +# +# Default: false +#enable-osc8=false + +[ui] +# +# Describes the format for each row in a mailbox view. This is a comma +# separated list of column names with an optional align and width suffix. After +# the column name, one of the '<' (left), ':' (center) or '>' (right) alignment +# characters can be added (by default, left) followed by an optional width +# specifier. The width is either an integer representing a fixed number of +# characters, or a percentage between 1% and 99% representing a fraction of the +# terminal width. It can also be one of the '*' (auto) or '=' (fit) special +# width specifiers. Auto width columns will be equally attributed the remaining +# terminal width. Fit width columns take the width of their contents. If no +# width specifier is set, '*' is used by default. +# +# Default: date<20,name<17,flags>4,subject<* +#index-columns=date<20,name<17,flags>4,subject<* + +# +# Each name in index-columns must have a corresponding column-$name setting. +# All column-$name settings accept golang text/template syntax. See +# aerc-templates(7) for available template attributes and functions. +# +# Default settings +#column-date={{.DateAutoFormat .Date.Local}} +#column-name={{index (.From | names) 0}} +#column-flags={{.Flags | join ""}} +#column-subject={{.ThreadPrefix}}{{if .ThreadFolded}}{{printf "{%d}" .ThreadCount}}{{end}}{{.Subject}} + +# +# String separator inserted between columns. When the column width specifier is +# an exact number of characters, the separator is added to it (i.e. the exact +# width will be fully available for the column contents). +# +# Default: " " +#column-separator=" " + +# +# See time.Time#Format at https://godoc.org/time#Time.Format +# +# Default: 2006-01-02 03:04 PM (ISO 8601 + 12 hour time) +#timestamp-format=2006-01-02 03:04 PM + +# +# Index-only time format for messages that were received/sent today. +# If this is not specified, timestamp-format is used instead. +# +#this-day-time-format= + +# +# Index-only time format for messages that were received/sent within the last +# 7 days. If this is not specified, timestamp-format is used instead. +# +#this-week-time-format= + +# +# Index-only time format for messages that were received/sent this year. +# If this is not specified, timestamp-format is used instead. +# +#this-year-time-format= + +# +# Width of the sidebar, including the border. +# +# Default: 20 +#sidebar-width=20 + +# +# Message to display when viewing an empty folder. +# +# Default: (no messages) +#empty-message=(no messages) + +# Message to display when no folders exists or are all filtered +# +# Default: (no folders) +#empty-dirlist=(no folders) + +# Enable mouse events in the ui, e.g. clicking and scrolling with the mousewheel +# +# Default: false +#mouse-enabled=false + +# +# Ring the bell when new messages are received +# +# Default: true +#new-message-bell=true + +# +# Template to use for Account tab titles +# +# Default: {{.Account}} +#tab-title-account={{.Account}} + +# Marker to show before a pinned tab's name. +# +# Default: ` +#pinned-tab-marker='`' + +# Template for the left side of the directory list. +# See aerc-templates(7) for all available fields and functions. +# +# Default: {{.Folder}} +#dirlist-left={{.Folder}} + +# Template for the right side of the directory list. +# See aerc-templates(7) for all available fields and functions. +# +# Default: {{if .Unread}}{{humanReadable .Unread}}/{{end}}{{if .Exists}}{{humanReadable .Exists}}{{end}} +#dirlist-right={{if .Unread}}{{humanReadable .Unread}}/{{end}}{{if .Exists}}{{humanReadable .Exists}}{{end}} + +# Delay after which the messages are actually listed when entering a directory. +# This avoids loading messages when skipping over folders and makes the UI more +# responsive. If you do not want that, set it to 0s. +# +# Default: 200ms +#dirlist-delay=200ms + +# Display the directory list as a foldable tree that allows to collapse and +# expand the folders. +# +# Default: false +#dirlist-tree=false + +# If dirlist-tree is enabled, set level at which folders are collapsed by +# default. Set to 0 to disable. +# +# Default: 0 +#dirlist-collapse=0 + +# List of space-separated criteria to sort the messages by, see *sort* +# command in *aerc*(1) for reference. Prefixing a criterion with "-r " +# reverses that criterion. +# +# Example: "from -r date" +# +#sort= + +# Moves to next message when the current message is deleted +# +# Default: true +#next-message-on-delete=true + +# Automatically set the "seen" flag when a message is opened in the message +# viewer. +# +# Default: true +#auto-mark-read=true + +# The directories where the stylesets are stored. It takes a colon-separated +# list of directories. If this is unset or if a styleset cannot be found, the +# following paths will be used as a fallback in that order: +# +# ${XDG_CONFIG_HOME:-~/.config}/aerc/stylesets +# ${XDG_DATA_HOME:-~/.local/share}/aerc/stylesets +# /usr/local/share/aerc/stylesets +# /usr/share/aerc/stylesets +# +#stylesets-dirs= + +# Uncomment to use box-drawing characters for vertical and horizontal borders. +# +# Default: " " +#border-char-vertical=" " +#border-char-horizontal=" " +border-char-vertical="│" +border-char-horizontal="─" + +# Sets the styleset to use for the aerc ui elements. +# +# Default: default +#styleset-name=default +styleset-name=catppuccin-frappe + +# Activates fuzzy search in commands and their arguments: the typed string is +# searched in the command or option in any position, and need not be +# consecutive characters in the command or option. +# +# Default: false +#fuzzy-complete=false + +# How long to wait after the last input before auto-completion is triggered. +# +# Default: 250ms +#completion-delay=250ms + +# The minimum required characters to allow auto-completion to be triggered after +# completion-delay. +# +# Default: 1 +#completion-min-chars=1 + +# +# Global switch for completion popovers +# +# Default: true +#completion-popovers=true + +# Uncomment to use UTF-8 symbols to indicate PGP status of messages +# +# Default: ASCII +#icon-unencrypted= +#icon-encrypted=✔ +#icon-signed=✔ +#icon-signed-encrypted=✔ +#icon-unknown=✘ +#icon-invalid=⚠ + +# Reverses the order of the message list. By default, the message list is +# ordered with the newest (highest UID) message on top. Reversing the order +# will put the oldest (lowest UID) message on top. This can be useful in cases +# where the backend does not support sorting. +# +# Default: false +#reverse-msglist-order = false + +# Reverse display of the mesage threads. Default order is the the intial +# message is on the top with all the replies being displayed below. The +# reverse option will put the initial message at the bottom with the +# replies on top. +# +# Default: false +#reverse-thread-order=false + +# Sort the thread siblings according to the sort criteria for the messages. If +# sort-thread-siblings is false, the thread siblings will be sorted based on +# the message UID in ascending order. This option is only applicable for +# client-side threading with a backend that enables sorting. Note that there's +# a performance impact when sorting is activated. +# +# Default: false +#sort-thread-siblings=false + +#[ui:account=foo] +# +# Enable a threaded view of messages. If this is not supported by the backend +# (IMAP server or notmuch), threads will be built by the client. +# +# Default: false +#threading-enabled=false + +# Force client-side thread building +# +# Default: false +#force-client-threads=false + +# Show thread context enables messages which do not match the current query (or +# belong to the current mailbox) to be shown for context. These messages can be +# styled separately using "msglist_thread_context" in a styleset. This feature +# is not supported by all backends +# +# Default: false +#show-thread-context=false + +# Debounce client-side thread building +# +# Default: 50ms +#client-threads-delay=50ms + +[statusline] +# +# Describes the format for the status line. This is a comma separated list of +# column names with an optional align and width suffix. See [ui].index-columns +# for more details. To completely mute the status line except for push +# notifications, explicitly set status-columns to an empty string. +# +# Default: left<*,center:=,right>* +#status-columns=left<*,center:=,right>* + +# +# Each name in status-columns must have a corresponding column-$name setting. +# All column-$name settings accept golang text/template syntax. See +# aerc-templates(7) for available template attributes and functions. +# +# Default settings +#column-left=[{{.Account}}] {{.StatusInfo}} +#column-center={{.PendingKeys}} +#column-right={{.TrayInfo}} + +# +# String separator inserted between columns. +# See [ui].column-separator for more details. +# +#column-separator=" " + +# Specifies the separator between grouped statusline elements. +# +# Default: " | " +#separator=" | " + +# Defines the mode for displaying the status elements. +# Options: text, icon +# +# Default: text +#display-mode=text + +[viewer] +# +# Specifies the pager to use when displaying emails. Note that some filters +# may add ANSI codes to add color to rendered emails, so you may want to use a +# pager which supports ANSI codes. +# +# Default: less -Rc +#pager=less -Rc + +# +# If an email offers several versions (multipart), you can configure which +# mimetype to prefer. For example, this can be used to prefer plaintext over +# html emails. +# +# Default: text/plain,text/html +#alternatives=text/plain,text/html + +# +# Default setting to determine whether to show full headers or only parsed +# ones in message viewer. +# +# Default: false +#show-headers=false + +# +# Layout of headers when viewing a message. To display multiple headers in the +# same row, separate them with a pipe, e.g. "From|To". Rows will be hidden if +# none of their specified headers are present in the message. +# +# Default: From|To,Cc|Bcc,Date,Subject +#header-layout=From|To,Cc|Bcc,Date,Subject + +# Whether to always show the mimetype of an email, even when it is just a single part +# +# Default: false +#always-show-mime=false + +# Parses and extracts http links when viewing a message. Links can then be +# accessed with the open-link command. +# +# Default: true +#parse-http-links=true + +[compose] +# +# Specifies the command to run the editor with. It will be shown in an embedded +# terminal, though it may also launch a graphical window if the environment +# supports it. Defaults to $EDITOR, or vi. +editor=helix + +# +# When set, aerc will create and read .eml files for composing that have +# non-standard \n linebreaks. This is only relevant if the used editor does not +# support CRLF linebreaks. +# +#lf-editor=false + +# +# Default header fields to display when composing a message. To display +# multiple headers in the same row, separate them with a pipe, e.g. "To|From". +# +# Default: To|From,Subject +#header-layout=To|From,Subject + +# +# Edit headers into the text editor instead than separate fields. +# +# When this is true, address-book-cmd is not supported and address completion +# is left to the editor itself. Also, displaying multiple headers on the same +# line is not possible. +# +# Default: false +#edit-headers=false + +# +# Specifies the command to be used to tab-complete email addresses. Any +# occurrence of "%s" in the address-book-cmd will be replaced with what the +# user has typed so far. +# +# The command must output the completions to standard output, one completion +# per line. Each line must be tab-delimited, with an email address occurring as +# the first field. Only the email address field is required. The second field, +# if present, will be treated as the contact name. Additional fields are +# ignored. +# +# This parameter can also be set per account in accounts.conf. +#address-book-cmd= + +# Specifies the command to be used to select attachments. Any occurrence of +# '%s' in the file-picker-cmd will be replaced with the argument +# to :attach -m . Any occurence of '%f' will be replaced by the +# location of a temporary file, from which aerc will read the selected files. +# +# If '%f' is not present, the command must output the selected files to +# standard output, one file per line. If it is present, then aerc does not +# capture the standard output and instead reads the files from the temporary +# file which should have the same format. +#file-picker-cmd= + +# +# Allow to address yourself when replying +# +# Default: true +#reply-to-self=true + +# Warn before sending an email with an empty subject. +# +# Default: false +#empty-subject-warning=false + +# +# Warn before sending an email that matches the specified regexp but does not +# have any attachments. Leave empty to disable this feature. +# +# Uses Go's regexp syntax, documented at https://golang.org/s/re2syntax. The +# "(?im)" flags are set by default (case-insensitive and multi-line). +# +# Example: +# no-attachment-warning=^[^>]*attach(ed|ment) +# +#no-attachment-warning= + +# +# When set, aerc will generate "format=flowed" bodies with a content type of +# "text/plain; format=flowed" as described in RFC3676. This format is easier to +# handle for some mailing software, and generally just looks like ordinary +# text. To actually make use of this format's features, you'll need support in +# your editor. +# +#format-flowed=false + +[multipart-converters] +# +# Converters allow to generate multipart/alternative messages by converting the +# main text/plain part into any other MIME type. Only exact MIME types are +# accepted. The commands are invoked with sh -c and are expected to output +# valid UTF-8 text. +# +# Example (obviously, this requires that you write your main text/plain body +# using the markdown syntax): +#text/html=pandoc -f markdown -t html --standalone + +[filters] +# +# Filters allow you to pipe an email body through a shell command to render +# certain emails differently, e.g. highlighting them with ANSI escape codes. +# +# The commands are invoked with sh -c. The following folders are prepended to +# the system $PATH to allow referencing filters from their name only: +# +# ${XDG_CONFIG_HOME:-~/.config}/aerc/filters +# ~/.local/libexec/aerc/filters +# ${XDG_DATA_HOME:-~/.local/share}/aerc/filters +# $PREFIX/libexec/aerc/filters +# $PREFIX/share/aerc/filters +# /usr/libexec/aerc/filters +# /usr/share/aerc/filters +# +# If you want to run a program in your default $PATH which has the same name +# as a builtin filter (e.g. /usr/bin/colorize), use its absolute path. +# +# The following variables are defined in the filter command environment: +# +# AERC_MIME_TYPE the part MIME type/subtype +# AERC_FORMAT the part content type format= parameter +# AERC_FILENAME the attachment filename (if any) +# AERC_SUBJECT the message Subject header value +# AERC_FROM the message From header value +# +# The first filter which matches the email's mimetype will be used, so order +# them from most to least specific. +# +# You can also match on non-mimetypes, by prefixing with the header to match +# against (non-case-sensitive) and a comma, e.g. subject,text will match a +# subject which contains "text". Use header,~regex to match against a regex. +# +text/plain=colorize +text/calendar=calendar +message/delivery-status=colorize +message/rfc822=colorize +#text/html=pandoc -f html -t plain | colorize +#text/html=html | colorize +#text/*=bat -fP --file-name="$AERC_FILENAME" +#application/x-sh=bat -fP -l sh +#image/*=catimg -w $(tput cols) - +#subject,~Git(hub|lab)=lolcat -f +#from,thatguywhodoesnothardwraphismessages=wrap -w 100 | colorize + +# This special filter is only used to post-process email headers when +# [viewer].show-headers=true +# By default, headers are piped directly into the pager. +# +.headers=colorize + +[openers] +# +# Openers allow you to specify the command to use for the :open and :open-link +# actions on a per-MIME-type basis. The :open-link URL scheme is used to +# determine the MIME type as follows: x-scheme-handler/. +# +# {} is expanded as the temporary filename to be opened. If it is not +# encountered in the command, the temporary filename will be appened to the end +# of the command. +# +# Like [filters], openers support basic shell globbing. The first opener which +# matches the part's MIME type (or URL scheme handler MIME type) will be used, +# so order them from most to least specific. +# +# Examples: +# x-scheme-handler/irc=hexchat +# x-scheme-handler/http*=firefox +# text/html=surf -dfgms +# text/plain=gvim {} +125 +# message/rfc822=thunderbird + +[hooks] +# +# Hooks are triggered whenever the associated event occurs. + +# +# Executed when a new email arrives in the selected folder +#mail-received=notify-send "[$AERC_ACCOUNT/$AERC_FOLDER] New mail from $AERC_FROM_NAME" "$AERC_SUBJECT" + +# +# Executed when aerc starts +#aerc-startup=aerc :terminal calcurse && aerc :next-tab + +# +# Executed when aerc shuts down. +#aerc-shutdown= + +[templates] +# Templates are used to populate email bodies automatically. +# + +# The directories where the templates are stored. It takes a colon-separated +# list of directories. If this is unset or if a template cannot be found, the +# following paths will be used as a fallback in that order: +# +# ${XDG_CONFIG_HOME:-~/.config}/aerc/templates +# ${XDG_DATA_HOME:-~/.local/share}/aerc/templates +# /usr/local/share/aerc/templates +# /usr/share/aerc/templates +# +#template-dirs= + +# The default template to be used for new messages. +# +# default: new_message +#new-message=new_message + +# The default template to be used for quoted replies. +# +# default: quoted_reply +#quoted-reply=quoted_reply + +# The default template to be used for forward as body. +# +# default: forward_as_body +#forwards=forward_as_body diff --git a/config/dot_config/aerc/stylesets/catppuccin-frappe b/config/dot_config/aerc/stylesets/catppuccin-frappe new file mode 100644 index 0000000..78e8e92 --- /dev/null +++ b/config/dot_config/aerc/stylesets/catppuccin-frappe @@ -0,0 +1,47 @@ +*.default=true +*.normal=true + +default.fg=#c6d0f5 + +error.fg=#e78284 +warning.fg=#ef9f76 +success.fg=#a6d189 + +tab.fg=#737994 +tab.bg=#292c3c +tab.selected.fg=#c6d0f5 +tab.selected.bg=#303446 +tab.selected.bold=true + +border.fg=#232634 +border.bold=true + +msglist_unread.bold=true +msglist_flagged.fg=#e5c890 +msglist_flagged.bold=true +msglist_result.fg=#8caaee +msglist_result.bold=true +msglist_*.selected.bold=true +msglist_*.selected.bg=#414559 + +dirlist_*.selected.bold=true +dirlist_*.selected.bg=#414559 + +statusline_default.fg=#949cbb +statusline_default.bg=#414559 +statusline_error.bold=true +statusline_success.bold=true + +[viewer] +url.fg=#8caaee +url.underline=true +header.bold=true +signature.dim=true +diff_meta.bold=true +diff_chunk.fg=#8caaee +diff_chunk_func.fg=#8caaee +diff_chunk_func.bold=true +diff_add.fg=#a6d189 +diff_del.fg=#e78284 +quote_*.fg=#737994 +quote_1.fg=#949cbb diff --git a/config/dot_config/aerc/stylesets/catppuccin-latte b/config/dot_config/aerc/stylesets/catppuccin-latte new file mode 100644 index 0000000..1be8fe2 --- /dev/null +++ b/config/dot_config/aerc/stylesets/catppuccin-latte @@ -0,0 +1,47 @@ +*.default=true +*.normal=true + +default.fg=#4c4f69 + +error.fg=#d20f39 +warning.fg=#fe640b +success.fg=#40a02b + +tab.fg=#9ca0b0 +tab.bg=#e6e9ef +tab.selected.fg=#4c4f69 +tab.selected.bg=#eff1f5 +tab.selected.bold=true + +border.fg=#dce0e8 +border.bold=true + +msglist_unread.bold=true +msglist_flagged.fg=#df8e1d +msglist_flagged.bold=true +msglist_result.fg=#1e66f5 +msglist_result.bold=true +msglist_*.selected.bold=true +msglist_*.selected.bg=#ccd0da + +dirlist_*.selected.bold=true +dirlist_*.selected.bg=#ccd0da + +statusline_default.fg=#7c7f93 +statusline_default.bg=#ccd0da +statusline_error.bold=true +statusline_success.bold=true + +[viewer] +url.fg=#1e66f5 +url.underline=true +header.bold=true +signature.dim=true +diff_meta.bold=true +diff_chunk.fg=#1e66f5 +diff_chunk_func.fg=#1e66f5 +diff_chunk_func.bold=true +diff_add.fg=#40a02b +diff_del.fg=#d20f39 +quote_*.fg=#9ca0b0 +quote_1.fg=#7c7f93 diff --git a/config/dot_config/aerc/stylesets/catppuccin-macchiato b/config/dot_config/aerc/stylesets/catppuccin-macchiato new file mode 100644 index 0000000..34d8163 --- /dev/null +++ b/config/dot_config/aerc/stylesets/catppuccin-macchiato @@ -0,0 +1,47 @@ +*.default=true +*.normal=true + +default.fg=#cad3f5 + +error.fg=#ed8796 +warning.fg=#f5a97f +success.fg=#a6da95 + +tab.fg=#6e738d +tab.bg=#1e2030 +tab.selected.fg=#cad3f5 +tab.selected.bg=#24273a +tab.selected.bold=true + +border.fg=#181926 +border.bold=true + +msglist_unread.bold=true +msglist_flagged.fg=#eed49f +msglist_flagged.bold=true +msglist_result.fg=#8aadf4 +msglist_result.bold=true +msglist_*.selected.bold=true +msglist_*.selected.bg=#363a4f + +dirlist_*.selected.bold=true +dirlist_*.selected.bg=#363a4f + +statusline_default.fg=#939ab7 +statusline_default.bg=#363a4f +statusline_error.bold=true +statusline_success.bold=true + +[viewer] +url.fg=#8aadf4 +url.underline=true +header.bold=true +signature.dim=true +diff_meta.bold=true +diff_chunk.fg=#8aadf4 +diff_chunk_func.fg=#8aadf4 +diff_chunk_func.bold=true +diff_add.fg=#a6da95 +diff_del.fg=#ed8796 +quote_*.fg=#6e738d +quote_1.fg=#939ab7